Services

Inspection services through the use of Infrared Equipment

 

  • Electrical Systems and Components including Lines, Towers, and Components of 115 kV and 38 kV

  • Electronic component

  • Steam systems - Traps, Safety Valves, Boilers, Pipes, etc.

  • Mechanical Equipment

  • Ceilings

 

 

In all cases, a visual inspection is performed to verify the integrity of the equipment, system or component and to see how they and their facilities conform to the NEC and OSHA regulations, 29 CFR. In this way we can guarantee that the 100% inspection of each equipment, system or component is carried out, thus achieving the degree of reliability required by this type of service.

Inspection services through the use of Ultrasound Equipment

 

  • 115 kV and 38 kV Power Lines, Oil Immersion Transformers and Electrical Components not accessible through Infrared

 

  • Steam Traps, Boiler Safety Valves, Boiler Enclosures, etc

 

  • Compressed air systems

  • Gas Systems

  • Mechanical Equipment

In all cases, a visual inspection is performed to verify the integrity of the equipment, system or component and to see how they and their facilities conform to the NEC and OSHA regulations, 29 CFR. In this way we can guarantee that the 100% inspection of each equipment, system or component is carried out, thus achieving the degree of reliability required by this type of service.

 
 

Inspection Services Through the use of Infrared and Ultrasound Equipment

 

Inspection through the combination of the use of infrared and ultrasound equipment is carried out in those systems or equipment that by their operation allow the application of both techniques. This allows us to offer a unique service in Puerto Rico at the highest level of reliability and professionalism.

This service applies to:

 

  • Electrical Systems and Components with voltages below nominal 600V as well as immersion transformers, lines, poles, towers, and components of more than 600 nominal V (4,160 V, 13.2 kV, 38 kV, 115 kV, etc.)

 

  • Steam systems and their components, steam traps, boiler safety valves, boiler enclosures.

 

  • Mechanical equipment, motors, pumps, compressors, etc

 

 

In all cases, a visual inspection is performed to verify the integrity of the equipment, system or component and to see how they and their facilities conform to the NEC and OSHA regulations, 29 CFR. In this way we can guarantee that the 100% inspection of each equipment, system or component is carried out, thus achieving the degree of reliability required by this type of service.

 

©Copyright 2018 Infra-Red Inspection Services, Inc. |  All rights reserved RKD.

 

Phone: (787) 841-1666  |  Fax: (787) 841-6385